Request Information
A workhorse machine for large and oversized cases.
  • Run KD blanks up to 45" long x 42" wide
  • All-mechanical drive for reliable operation
  • Quick changeover with no-tools adjustments
  • PLC control with color touchscreen controls
  • Seal with tape or adhesive
Unit of Measure

Specifications

Brand

 N/A ABC Packaging

Case Style

 N/A Half Slotted Case (HSC) Regular Slotted Case (RSC)
Speed1 N/A Up to 30 cases/min

K.D. Length

 N/A 14 to 45 in

K.D. Width

 N/A 12 to 42 in

Type

 N/A Case Erectors

Electrical Specifications

Primary Voltage

 N/A 230 V460 V

Frequency

 N/A 60 Hz

Number of Phase

 N/A 3

Air Flow

Air Flow Per Cycle (Adhesive) at 80 Pound Per Square Inch (psi) Pressure

 N/A 1.12 scfm
Air Flow Per Cycle (Tape) at 80 Pound Per Square Inch (psi) Pressure2 N/A 576 scfm

Models

Models

 N/A 340HM 340T

Features

Features

 N/A Intelligent Control ensures precise operation
A-B-C's Intelligent Control takes PLC logic one step further, to provide unprecedented control of line performance. Closed loop position feedback ensures precise timing of each operating sequence, utilizing non-contact sensors to provide input. The touchscreen display provides real-time operating data, and allows independent operation of all functions, diagnostics, and changeover settings.

Easy load magazine and positive case feed
The high capacity magazine holds up to two case stacks, and automatically indexes each stack into position to provide a continuous case supply with minimum operator attention.

Cases are indexed with a combination gripper/slide rail system that is designed to accommodate out-of-spec corrugated and smoothly handles large, heavy cases.

Reliable, case-squaring mechanical transfer
The mechanical walking beam transfer bars are mounted on synchronized transfer chain. This design provides additional squaring action as cases travel from erecting through sealing.

Servo-powered compression ram (Adhesive sealing)
The servo-powered sealing ram ensures full compression on every case for secure sealing during high speed production.

2" or 3" wide Tape applicator (Tape sealing)

Quality Features

Quality Features

 N/A
  • Closed loop steel frame construction
  • All-mechanical main case drive
  • High capacity vacuum system
  • Case control discharge chute
  • Gull-wing style high visibility machine doors allow easy machine access
  • Elevated beacon fault light
  • Sealed bearings throughout minimize maintenance
  • Low level magazine holds up to 2 stacks of cases
  • A-B-C's Intelligent Control for operation, machine jog, diagnostics, troubleshooting, changeover settings
    • Alarm history readout
    • PLC control ensures precise operation
    • Touchscreen control panel displays all operating data and offers complete control of all functions
    • Non-contact sensors monitor machine operation
    • Running case count
    • Production count pre-select
  • Standard fault detection features:
    • No/low air pressure
    • Downstream case backup
    • Door opened
    • Case did not open properly
    • Motor overload
    • Encoder or coupling malfunction
  • Powered auto-adjust option
  • Magazine extension option for added KD capacity

Note

Note

 N/A All information in this brochure was current at time of printing, however, in the continuing effort to improve the quality and construction of A-B-C equipment, we reserve the right to make changes without notice.
  • 1 Depending on case size.
  • 2 Automatic water eliminator keeps air lines dry.